rc-python-video-v2/Contrl.client/control.py

import time
import threading
import math
from socket import *
# pip3 install smbus ->PCF8591芯片
import smbus


class ControlServer(threading.Thread):
    def __init__(self, ADDR):
        threading.Thread.__init__(self)
        self.setDaemon(True)
        # 连接socket
        self.sock = socket(AF_INET, SOCK_STREAM)
        self.sock.connect_ex(ADDR)

        # 初始化smbus  1表示scl.1  0表示scl.0
        self.BUS = smbus.SMBus(1)
        # 寄存器地址
        self.ADR = 0x48
        # 电位器地址->对应模块in1,in2
        self.P1 = 0x41
        self.P2 = 0x42
        self.P3 = 0x43
        self.P4 = 0x44
        # 方向值
        self.CENTER = 0
        # 最终方向
        self.CON = 'Center'
        # 方向误差
        self.VD = 10

    def __del__(self):
        self.sock.close()
        pass

    def run(self):
        # 数模初始值
        self.BUS.write_byte(self.ADR, self.P1)
        self.CENTER = self.BUS.read_byte(self.ADR)
        while True:
            data = self.Orientation()
            self.sock.sendall(data)
            time.sleep(0.03)

    # 电压值误差根据实际情况调整
    def Residual(self, v):
        # 中间值
        vs = self.CENTER
        # 误差值
        vd = self.VD
        if math.fabs(v - vs) > vd:
            return v
        elif math.fabs(v - vs) < vd:
            return vs
        else:
            return vs

    # 区分方向
    def Orientation(self):
        self.BUS.write_byte(self.ADR, self.P1)
        v0 = self.BUS.read_byte(self.ADR)
        time.sleep(0.02)
        self.BUS.write_byte(self.ADR, self.P2)
        v1 = self.BUS.read_byte(self.ADR)
        time.sleep(0.02)
        self.BUS.write_byte(self.ADR, self.P3)
        v2 = self.BUS.read_byte(self.ADR)
        time.sleep(0.02)
        self.BUS.write_byte(self.ADR, self.P4)
        v3 = self.BUS.read_byte(self.ADR)

        # 接入socket 发送数据
        # db = '{"type":"conctrl","data":{"v0":%s,"v1":%s,"v2":"%s","v3":"%s"}}' % (
        #     v0, v1, v2, v3)
        db = '{"type":"conctrl","data":[{"name":"MOTOR","value":[%s,%s]},{"name":"SERVO","value":[%s,%s]}]}' % (
            v0, v1, v2, v3)
        data = str.encode(db)
        return data